AUTOMATIC FLASH POINT TESTERS
The automatic Abel module conforms precisely to national and international Abel flash point test methods. It comprises a water bath, sample cup and lid, temperature probes, flash detector, and a DIPS pod containing the dipping mechanism with co-axial gas/electric ignitor, and a stirrer.
The Abel module must be used with the Multiflash Universal Base unit (p/n 34000-0). The base unit recognises that the Abel module is connected and instantaneously sets up standard test parameters and calibration data. The cooling boost module (p/n 34008-0) is required to test all types of sample.
Aviation |
| SPECIFICATIONS | |
|---|---|
| Temperature Range | Ambient to 93°C (5°C to 93°C with optional cryostat) |
| Bath | Liquid / Liquid |
| Heating | Hot Plate |
| Post Test Cooling | Fan assisted or Circulating liquid / external cryostat (optional) |
| Post Test Cool-down Time (90°C to 50°C) | 45 minutes (Fan) 3 minutes (external cryostat) |
| Ignitor | Quick-fit coaxial gas jet / electric hot wire, user selectable (Electric hot wire pilot light for gas jet) |
| Temperature Probes | Class A Platinum Resistance Thermometers |
| Stirrer Speed | 30 rpm |
| Gas Supply (gas jet ignitor) | Laboratory gas, 3kPa (0.44psi) maximum pressure |
| Cooling Supply | Water (5°C and above) Water / Ethylene Glycol 50/50 (below 5°C) 125kPa (18psi) maximum pressure |
| Voltage | 110/120V or 220/240V, 50/60Hz, (switchable) |
| Power | 600W |
| Size (HxWxD) | 47 x 45 x 34cm |
| Weight | 13kg |
| CCCN Code: | Tariff 90268020 |
