AUTOMATIC FLASH POINT TESTERS
The automatic Cleveland module conforms precisely to national and international Cleveland open cup flash point test methods. It comprises a sample cup, temperature probe, flash/fire detector, and a DIPS pod containing the sweeping mechanism with co-axial gas/electric ignitor.
The Cleveland module must be used with the Multiflash Universal Base unit (p/n 34000-0). The base unit recognises that the Cleveland module is connected and instantaneously sets up standard test parameters and calibration data..
Greases |
Energy & Power |
Bitumen & Asphalt |
Chemicals & Solvents |
Edible oils & Fats |
SPECIFICATIONS | |
---|---|
Temperature Range | Ambient to 400°C |
Bath | N/A |
Heating | Hotplate |
Post Test Cooling | Fan assisted or Forced Air (Requires 34008-0 Cooling Boost Module option) |
Post Test Cool-down Time (90°C to 50°C) | 9 minutes (Fan) 6 minutes (Forced Air) |
Ignitor | Quick-fit coaxial gas jet / electric hot wire, user selectable (Electric hot wire pilot light for gas jet) |
Temperature Probe | Class A Platinum Resistance Thermometer, °C or °F |
Flash / Fire Detection | Ionisation Ring |
Gas Supply (gas jet ignitor) | Laboratory gas, 3kPa (0.44psi) maximum pressure |
Air Supply (forced air cooling | Dry compressed air, 670kPa (100psi) maximum pressure |
Voltage | 110/120V or 220/240V, 50/60Hz, (switchable) |
Power | 1kW |
Size (HxWxD) | 34 x 45 x 42cm |
Weight | 12kg |
CCCN Code: | Tariff 90268020 |